Anti-solvent assisted treatment for improved morphology and efficiency of lead acetate derived perovskite solar cells

An efficient solution-processable route employing Pb(Ac)₂ as lead source and anti-solvent treatment to achieve fully covered and homogenous perovskite films is reported.     

Grain boundary diffusion coefficients in gold–nickel thin films

Polycrystalline gold–nickel thin films are deposited on silicon (111) wafers by evaporation in a vacuum of 2 × 10^?6 mbar. Concentration profiles of heat‐treated specimens are obtained by Auger electron depth profiling. The heat treatments are carried out in a vacuum furnace of 4 × 10^?6 mbar in the temperature interval 473–773 K. The grain boundary diffusion coefficient is determined, using a modified Wipple model, to be (3 × 10^?4 cm² s^?1) exp (?0.94 eV kT^?1). It is concluded that interdiffusion in the investigated system is characterized by type B kinetics, and that grain boundary diffusion plays a dominant role in the mass transport process of such films. Copyright © 2003 John Wiley & Sons, Ltd.     

New (1R,4R)-2-arylidene-p-menthan-3-ones with a bridging ester group in the arylidene fragment. Synthesis and behavior in liquid-crystalline systems

(1R,4R)-2-(4-Hydroxybenzylidene)- and (1R,4R)-2-(4"-hydroxybiphenyl-4-yl)methylene-p-menthan-3-ones were synthesized by condensation of (–)-menthone with O-tetrahydropyran-2-yl derivatives of 4-hydroxybenzaldehyde and 4"-hydroxy-4-formylbiphenyl, respectively, in a DMSO—base medium followed by the removal of the protective group. The reactions of these hydroxy derivatives with 4-alkylbenzoic, 4-alkyloxybenzoic, trans-4-alkylcyclohexane-4-carboxylic, and 4"-alkylbiphenyl-4-carboxylic acids afforded three series of new chiral esters. Compounds containing the arylidene moiety with three benzene rings were found to exhibit liquid-crystalline properties. The characteristic features of these compounds are discussed based on the results of studies by polarizing microscopy, differential scanning calorimetry, and small-angle X-ray scattering. It was found that the mesomorphic compounds under study can form a smectic A mesophase, twist grain boundary mesophases (TGBA), and blue phases in a wide temperature range. Upon dissolution of certain of chiral compounds in 4"-cyano-4-pentylbiphenyl, a rather high twisting power and the thermal stabilizing effect on mesophases were observed.     

The Effect of SiO2 Addition on the Grain Size and Photocatalytic Activity of TiO2 Thin Films

The uniform transparent TiO₂/SiO₂ nanometer composite thin films were prepared via sol-gel method on the soda lime glass substrates, and were characterized by X-ray photoelectron spectroscopy (XPS), FTIR spectroscopy, UV-VIS spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD) and BET surface areas. It was found that the addition of SiO₂ to TiO₂ thin films could suppress the grain growth of TiO₂ crystal and increase the hydroxyl content of the surface of TiO₂ films. The photocatalytic activity of the as-prepared TiO₂/SiO₂ composite thin films increases for SiO₂ content of less than 5 mol%.     

Dynamic release process of pollutants during suspended sediment transport in aquatic system

Pollutants release is highly consistent with suspended sediment concentration （SSC） in water column, especially during re-suspension and transport events. The present research focuses on pollutant dynamic release from re-suspended sediment, especially the vertical distribution relationship between them. The sediment erosion experiments on a series of uniform flow are conducted in a circulate flume. Reactive tracer （phosphorus） is used as the contaminant in fine-grained sediments to identify the release characteristic length and time. Experimental results show that the flow condition near-bed depends on the sediment surface roughness. The region with high turbulent intensities corresponds to a high concentration sediment layer. In addition, the SSC decreases with the distance, water depth, and particle grain size. The sediment in a smaller grain size takes much more time to reach equilibrium concentration. Total phosphorus （TP） concentration changes along the water depth as SSC in the initial re-suspension stage, appearing in two obvious concentration regimes： the upper low-concentration layer and the high-concentration near-bottom layer. This layered phenomenon remains for about 3 hours until SSC distri- bution tends to be uniform. Longitudinal desorption plays an important role in long-way transport to reduce the amount of suspended sediment in water column.     

Ab initio modelling of the interaction of H interstitials with grain boundaries in bcc Fe

Hydrogen that is accumulated within the grain boundaries can lead to a decrease of the critical strain required to fracture the material. The paper presents results of ab initio modelling of hydrogen–grain boundary interaction in ferromagnetic bcc iron. Modelling was performed using density functional theory with generalised gradient approximation (GGA’96), as implemented in WIEN2k package. Three fully relaxed tilt grain boundaries, Σ5(310), Σ5(210) and Σ3(111), were studied. The supercells contained 40–48 atoms, i.e. 20–24 atoms in each of the two ‘grains’. Calculated formation energies of grain boundaries is 1.44, 1.83 and 1.46 J/m² and the maximum binding (trapping) energies of hydrogen to the boundaries are 0.43, 0.83 and 0.39 eV, respectively. These values are close to other researchers’ data. The higher value of trapping energy of the Σ5(210) boundary is probably due to the asymmetrical atom configurations resulting from mutual rigid shift of the two grains that was necessary to be introduced to provide optimal distances between Fe atoms, unlike the other two boundary types.     

HTPB复合底排药压缩屈服应力模型研究

目前广泛应用于底排增程技术的 HTPB 复合底排药 (composite base bleed grain,CBBG) 是一种颗粒填充含能材料,战场环境中将承受冲击、温度等载荷作用. 为研究 HTPB CBBG 冲击压缩力学性能,进行了不同温度 (233$\sim$323 K) 和应变率 (1100$\sim$7900 s$^{-1}$) 下的分离式霍普金森压杆实验. 实验结果表明,各工况下,应力应变曲线均呈现屈服-$\!$-应变硬化特征,HTPB CBBG 保持高韧性. 提高应变率和降低温度均导致相同应变下的应力幅值上升,但温度较应变率对HTPB CBBG 冲击压缩力学性能的影响更为显著. 基于所研究温度范围高于 HTPB CBBG 玻璃化转变温度,通过将水平、垂直移位因子与温度的关系表示为 WLF 方程的形式,将时温等效原理引入协同模型,并计及内应力的应变率增强效应,提出了一种新的屈服应力模型.选取参考温度,利用水平、垂直移位因子-$\!$-温度曲线和屈服应力主曲线拟合模型参数.模型预测值与实验数据对比结果表明:该模型可准确表征 233$\sim$323 K 时 HTPB CBBG 屈服应力的双线性应变率相关性,明确了较低和较高应变率时,应变率效应分别主要由内应力和驱动力贡献.      

Self-assembly mechanism of PEG-b-PCL and PEG-b-PBO-b-PCL amphiphilic copolymer micelles in aqueous solution from coarse grain modeling

We followed the self-assembly of high-molecular weight MePEG- b -PCL (poly(methyl ethylene glycol)-block-poly(ε-caprolactone)) diblock and MePEG- b -PBO- b -PCL (poly(methyl ethylene glycol)-block-poly(1,2-butylene oxide)-block-poly(ε-caprolactone)) into micelles using molecular dynamics simulation with a coarse grain (CG) force field based on quantum mechanics (CGq FF). The triblock polymer included a short poly(1,2-butylene oxide) (PBO) at the hydrophilic-hydrophobic interface of these systems. Keeping the hydrophilic length fixed (MePEG₄₅), we considered 250 chains in which the hydrophobic length changed from PCL₄₄ or PBO₆- b -PCL₄₃ to PCL₆₂ or PBO₉- b -PCL₆₁. The polymers were solvated in explicit water for 2 μs of simulations at 310.15 K. We found that the longer diblock system undergoes a morphological transition from an intermediate rod-like micelle to a prolate-sphere, while the micelle formed from the longer triblock system is a stable rod-like micelle. The two shorter diblock and triblock systems show similar self-assembly processes, both resulting in slightly prolate-spheres. The dynamics of the self-assembly is quantified in terms of chain radius of gyration, shape anisotropy, and hydration of the micelle cores. The final micelle structures are analyzed in terms of the local density components. We conclude that the CG model accurately describes the molecular mechanisms of self-assembly and the equilibrium micellar structures of hydrophilic and hydrophobic chains, including the quantity of solvent trapped inside the micellar core.     

Microstructural evolution of AZ31 magnesium alloy subjected to sliding friction treatment

Microstructural evolution and grain refinement mechanism in AZ31 magnesium alloy subjected to sliding friction treatment were investigated by means of transmission electron microscopy. The process of grain refinement was found to involve the following stages: (I) coarse grains were divided into fine twin plates through mechanical twinning; then the twin plates were transformed to lamellae with the accumulation of residual dislocations at the twin boundaries; (II) the lamellae were separated into subgrains with increasing grain boundary misorientation and evolution of high angle boundaries into random boundaries by continuous dynamic recrystallisation (cDRX); (III) the formation of nanograins. The mechanisms for the final stage, the formation of nanograins, can be classified into three types: (i) cDRX; (ii) discontinuous dynamic recrystallisation (dDRX); (iii) a combined mechanism of prior shear-band and subsequent dDRX. Stored strain energy plays an important role in determining deformation mechanisms during plastic deformation.     

Azimuthal orientational correlations due to excluded volume epitaxy in growing anisotropic grains

The microstructure of anisotropically shaped grains can strongly influence a range of material properties, including transport, mechanical and electro-optical. A grain-structure-related phenomenon, known as excluded volume epitaxy (EVE), is reported in this study. EVE is a local, inter-grain orientational correlations effect, which results from a combination of continuous nucleation of anisotropic grains and impingement of growing grains. Due to EVE, anisotropically shaped grains have a tendency to be similarly aligned in a local neighbourhood, despite the absence of any forced global orientation in the sample. The effect has been repeatedly observed by the authors in block copolymers, as illustrated by a representative TEM image. Optical microscopy of anisotropically shaped non-polymeric crystals revealed the generality of this effect. The simulation study revealed a tendency for azimuthal, inter-grain orientational correlation and re-confirmed the experimental observation of EVE.